The stator coil of the brushless engine needs to be replaced regularly. It has also been used for a while. It needs to be replaced in time to promote the normal use of the motor. Before replacing, we need to know that there are some ways to replace the stator coil. The following content is as follows. Step of the stator coil:
Before starting the repair process, make sure to inspect the electronic iron core thoroughly and remove any burrs present. Moreover, clean the storage tank thoroughly to eliminate any debris present, so as to ensure a clean working environment. It is also important to spray semiconductor paint in the storage tank. However, if the motor coil is found to be faulty, then it needs to be replaced before proceeding with the repair process.
To prepare equipment tools, the first step is to remove the tide and then conduct the standard test. Once the test is passed, it is essential to use resistance for preparing Saudi belts, impregnated paint, and covering new coils. The unsolvable stator coils must be processed before offline for insulation inspection or pressure resistance test. The completeness should be ensured to have a well-functioning equipment tool.
3. Embedded row: According to the data order of the data recorded earlier; put the insulation structure of the insulation structure on the bottom of the groove, the upper and lower layers, the bottom of the groove and the cushion; Please pay attention to the heating current and control the temperature; the lower coils should be performed for pressure resistance to ensure that the lower coils should be intact.
The wiring technique for the brush-free motor was welded and connected according to the guidelines provided. Furthermore, the wiring was also diligently welded based on the line specifications.
5. Use silver welding to heat the coil during welding to prevent the coil from being burned.
To ensure that the welding quality is up to par, it is important to carry out a thorough inspection. This involves checking for any defects or imperfections, as well as removing any burrs that may have been left behind during the welding process. To meet the insulation specification, it is also crucial to use the appropriate bandage. Additionally, the use of six yellow waxes and eight coats of Yunmu will further enhance the overall quality of the finished product. Finally, the use of a white sand belt on the outer layer provides a smooth and polished appearance.
Aside from following the correct procedures to replace the stator coil, it is critical to conduct a thorough inspection. During the process of replacing the stator coil in a brushless motor, it is essential to ensure that the wiring is correctly done. The welding quality should also be checked to guarantee a well-functioning motor.
www.dw-motor.com